Ultimate-technology 500 POS Manual do Utilizador descarregar pdf (Página 37)

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s) Operation Normal Indication Remarks

Indicator LED

Mode (70)

1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function

Code 70.

LED (2) turns on.

2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to

select LED mode of operation.

LED Mode

0 = Command mode of operation*

1 = PC mode of operation

LED (2) turns off.

3. Program the next function code or exit programming mode by entering 99 on Series

500 Keyboard numeric keypad or by swiping the Programmer's card. If using the

optional 3-position keyswitch, move switch out of the AUX position.

Enable/Disable

Keyboard Key

Clicks (71)

1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function

Code 71.

LED (2) turns on.

2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to

select key click mode of operation.

Key Click Mode

0 = off

1 = on*

LED (2) turns off.

3. Program the next function code or exit programming mode by entering 99 on Series

500 Keyboard numeric keypad or by swiping the Programmer's card. If using the

optional 3-position keyswitch, move switch out of the AUX position.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 79 80

Sem comentários

Ultimate-technology 500 POS Manual do Utilizador Página 37