Ultimate-technology 600 POS Manual do Utilizador descarregar pdf (Página 36)

Series 600 POS Keyboard 31

Table 3. Local Mode programming Function Codes and Default Settings

FUNCTION

CODE

PARAMETER DEFAULT

SETTING

(XXh = Hex

Code in

ASCII)

REMARKS

12 MSR Track 1,3 Suffix ?<CR>

(3Fh,ODh) for

both format 1

and 3

Used to send suffixes after the magnetic

card data.

13 MSR Track 3 Account

Separator

: (3Ah) for

format 3

Used to send an account separator on the

magnetic card data.

14 MSR Track 2 Prefix ; (3Bh) for

format 2

Used to send a prefix before magnetic card

data.

15 MSR Track 2 Field Separator = (3Dh) for

format 2

Used to send a field separator between

fields of magnetic card data.

16 MSR Track 2 Suffix ?<CR>

(3Fh,0Dh) for

format 2

Used to send a suffix after the magnetic

card data.

17 MSR Bad Read Track 1,3 M1!<CR>

(4Dh,31h,

21h,0Dh)

Used to send a key sequence to the host

computer upon a bad magnetic card read.

18 MSR Bad Read Track 2 M2!<CR>

(4Dh,32h,

21h,0Dh)

Used to send a key sequence to the host

computer upon a bad magnetic card read.

19 MSR Sending Send any

track (0)

Used to send MSR data if one or both

tracks are good. 0 = send any track;

1 = send only if both tracks are good.

20 RS232 Port 0 Baud Rate 9600 Baud

Rate

Used to select a baud rate for Port 0. Baud

rates available are: 300, 600, 1200, 2400,

4800, 9600, 19200, 38400, and 57600.

21 RS232 Port 0 Stop Bits 2 stop bits Used to select number of stop bits (1 or 2)

used with Port 0.

22 RS232 Port 0 Parity No parity Used to select parity used with Port 0.

Selections available are; no parity, odd

parity, or even parity.

23 RS232 Port 0 handshaking Both Used to select method of handshaking

used with Port 0. Selections available are:

none, CTS/RTS, XON/XOFF or both.

24 RS232 Port 0 Word Length 8 bits Used to change the word length, 7 or 8

bits, of the data at Port 0.

25 RS232 port 0 Prefix None Used to place a prefix before the packet of

data before it is sent out of the keyboard

Main Port. (This function is inactive if port

0 is the main port.)

26 RS232 port 0 Suffix (<CR> (0Dh) Used to place a suffix after the packet of

data before it is sent out of the keyboard

Main Port. (This function is inactive if port

0 is the main port.)

Table 3. Local Mode programming Function Codes and Default Settings

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 80 81

Comentários a estes Manuais

Sem comentários

Ultimate-technology 600 POS Manual do Utilizador Página 36

Comentários a estes Manuais